Contact us
Welcome to call
13715491170
Leave us a messageMessage
Technical Support
Your location:Home ＞ News ＞ Technical SupportRequirements for cold bending of PC boards
Announcer:Haosu Time:2017-03-14
The biggest characteristic of the hollow sunlight board is that it can bend into the arch with different bend radius along the direction of the rib, which not only improves the lighting area, but also meets the bending requirements of the architectural art design. And improve the bearing capacity of sheet, is unmatched by ordinary glass. The plate allows the correct orientation of the bending, and the bending radius shall not be less than that listed below to avoid the rupture of the exposed surface:
Minimum radius = sheet thickness * 175, this is the limit radius (non guaranteed value)
The radius of the proposal is controlled more than 200 times of the thickness of the plate, which can better prevent the damage of the plate.
Minimum radius = sheet thickness * 175, this is the limit radius (non guaranteed value)
The radius of the proposal is controlled more than 200 times of the thickness of the plate, which can better prevent the damage of the plate.
Related news
- PC plate material properties2017-03-14
- Sealing technology of PC board2017-03-14
- Method for mounting PC board2017-03-14
- PC board installation precautions2017-03-14
- Storage and transportation of PC plates2017-03-14
